Woman playing a Nintendo Switch 2 on a couch beside an open maple travel case holding game cards and the charger.

Case Series

Nintendo Switch 2 Travel Case

Solid wood carrying case for 15 games and the charger

$137.00

Pale blond with a fine, even grain. Hard-wearing.

Food-Safe Finish

Made in USA

Heirloom Quality

Nintendo Switch 2 Travel Case

Food-safe Finish

Made in USA

Heirloom

Felt-lined solid hardwood

This wooden Nintendo Switch 2 carrying case is cut from solid hard maple or American black walnut, 15 by 6 by 2.25 inches closed, and lined with thirteen hand-cut felt pieces that hold the console at its edges. Fifteen game cards ride in their own slots beside it, and the original 60W charging block and cable have a cavity of their own. A pass-through channel in the case wall lets the Switch 2 charge without coming out. Solid brass hinges, a mechanical tension latch, and a hand-rubbed oil finish. Made in the USA in Colorado Springs, Colorado.

Maple wooden Nintendo Switch 2 case open on a black granite counter with the console and charger inside.

Walnut Nintendo Switch 2 case open on a nightstand under a stained-glass lamp, game cards in its slots, console in front.

Fitted to the Nintendo Switch 2

Thirteen individually cut felt pieces line the interior, placed by hand so the case carries the Switch 2 at its edges and nothing presses on the screen. The console goes in with both Joy-Con 2 controllers attached, and recesses at the lift points let you pick it up with a fingertip. Around it is a solid hardwood shell with brass hinges and a mechanical tension latch that stays shut in a bag without relying on magnets.

Hard maple Nintendo Switch 2 case open on a nightstand with the console charging inside.

Charges inside the case

A channel through the case wall brings the charging cable in, so the Switch 2 charges where it sits, with the lid open or closed. Plug in at a desk, a hotel nightstand, or a kitchen counter and the console tops up in its felt instead of lying loose beside an outlet. With the lid closed, charge it asleep or powered off.

Close view of game cards in the slots of a walnut Nintendo Switch 2 case, with the charging cable and block stored inside.

Fifteen games and the charger

Fifteen game card slots are cut into the base beside the console, so a whole library travels with it, plus the card already loaded in the Switch 2. The original 60W charging block and its cable have their own cavity at the end of the case. Every piece has a place, and nothing shifts on the way.

Specifications

Dimensions	15" x 6" x 2.25" closed
Weight	About 3 lb
Material	Solid American hard maple or black walnut
Finish	Hand-rubbed furniture-grade oil finish
Hardware	Solid brass hinges, mechanical tension latch
Capacity	Nintendo Switch 2 with Joy-Con 2 controllers attached, 15 game cards, original 60W charging block and cable
Includes	Felt lining, 13 hand-cut pieces
Made In	Colorado Springs, Colorado, USA
Lead Time	Ships in 3 to 5 days
Disclosure	"Nintendo", "Switch", and "Joy-Con" are trademarks belonging to Nintendo of America Inc. Kineo Mountain Woodsmithing claims no association or endorsement by Nintendo of America Inc. All trademarks belong to their respective rights holders. Kineo Mountain Woodsmithing claims no association or endorsement in relation to any trademark not owned solely by Kineo Mountain Woodsmithing.

Frequently asked questions

Does the Nintendo Switch 2 fit with the Joy-Con 2 controllers attached?

Yes. The cavity is cut for the Nintendo Switch 2 with both Joy-Con 2 controllers attached, and thirteen hand-cut felt pieces hold it at its edges so nothing presses on the screen.

Will it fit the original Nintendo Switch or the Switch OLED?

This case is cut specifically for the Nintendo Switch 2. Earlier Switch models are a different size, so we do not recommend it for them.

Do you make this case for the Steam Deck?

Yes. The wooden Steam Deck travel case is a separate case with a cavity cut for the Steam Deck, LCD or OLED, and room for its factory charger.

How many games does it hold?

Fifteen game cards (cartridges) in their own slots beside the console, plus the one loaded in the Switch 2.

Does the charger fit inside?

Yes. The original 60W charging block and its cable have their own cavity, so the charger travels in the case with the console.

Can the Switch 2 charge while it is in the case?

Yes. A pass-through channel in the case wall brings the charging cable in, so the console charges where it sits, with the lid open or closed. With the lid closed, charge it asleep or powered off.

Is it a hard case or a wood skin?

A hard case. It is a hinged carrying case made of solid hard maple or American black walnut, not a wood-grain skin, wrap, or snap-on shell. The console rests inside it on felt.

How is it different from a plastic or EVA zip case?

It is a rigid, hinged hard case cut from solid hardwood, with solid brass hinges and a mechanical latch in place of a zipper. The Switch 2 rests on thirteen hand-cut felt pieces, and the game cards and charger each have a cavity of their own.

How does it stay closed in a bag?

A mechanical tension latch holds the lid shut under load. It is designed and made in America by our sister company, Kineo Mountain Engineering, and it does not rely on magnets. Solid brass hinges carry the lid.

Is the case hard to open?

No. The current latch has a looser fit than the one on early cases, so the lid opens without forcing it and still stays shut in a bag. A review of an early case mentions a stiffer latch; that latch has since been replaced with the current one.

Can it be engraved?

Custom engraving is available on request. Contact us before ordering so we can confirm the design and where it goes.

Maple or walnut?

Both are built the same way and hold the same things. Hard maple is light and close-grained; American black walnut is dark brown. Walnut costs more.

What is included?

The case only. The console, charger, cable, and games are not included.

How much does the case weigh?

About 3 pounds in either wood.

How fast does it ship?

Orders ship in 3 to 5 days. Rates and delivery details are in the shipping policy.

How do I clean it?

Wipe the wood with a dry or lightly damp cloth. Keep it out of standing water and direct heat, and keep soap and cleaners off the finish.

Is it made in the USA?

Yes. The case is made in the USA: cut, lined, and finished in Colorado Springs, Colorado, from American hard maple or American black walnut. The latch is made in America too.

Customer Reviews

4.7

Rated 4.7 out of 5 stars

Based on 3 reviews

100%would recommend this product

Product QualityRated 4.7 on a scale of 1 to 5

WeightRated 0.0 on a scale of minus 2 to 2

Product AppearanceRated 5.0 on a scale of 1 to 5

Write a Review (Opens in a new tab)

3 reviews

Sort

Rated 5 out of 5 stars
11 months ago
Gaming Case
This gaming case was perfect! It fits my backpack flawlessly and is exactly what I was looking for. The build is sturdy and it keeps my stuff secure without taking up too much space.
JN
Jason N.
Verified Buyer
Was this helpful?
Rated 4 out of 5 stars
11 months ago
Very sturdy but it gets stuck sometimes
It’s a pretty awesome case and I got it from a discount code after watching Matt Christiansen since they sponsor him.
But anyways, it’s a well made sturdy case that keeps my SW2 intact. It’s also well crafted and beautiful where some friends at church were interested when we did a Mario kart night.
While that’s awesome, my biggest complaint is how hard it gets opening it up again forcing me to use strength to the point I’m hoping my sw2 and/or other components doesn’t fly out. But Maybe some WD40 would help do the trick or I need to break it in more.
But other than that, it does the job and I’m happy with my purchase
RB
Ryan B.
Verified Buyer
Was this helpful?
Rated 5 out of 5 stars
12 months ago
A lovely classic case that keeps my electronics secure
It looks amazing. Professional design and construction. A perfect blend of classic and modern. If I had more compatible systems, I would buy again.
WS
William S.
Verified Buyer
Was this helpful?